AccuTouch® 2210 Serial Controller (Discontinued December 2006)
Overview
The 2210 serial controller (Part # 055165-000) uses the popular EIA RS-232C serial interface for connection to a wide range of host computers. Hardware and software handshaking are supported along with packet checksums for reliable communication. The 2210 board is typically mounted inside the display enclosure. Power is sourced inside the display.
Presupuesto
-
Técnico
Número(s) de Parte(s)
055165-000
Tecnología
Resistiva de 5 hilos (AccuTouch®)
Cantidad de toques
Solo toque
Tiempo total de respuesta (tipico)
21 ms at 9600 baud, 7 ms at 19,200 baud
Métodos de entrada
Dedo
Mano con guantes
Lápiz pasivoDimensiones
3.30" x 2.10" x 0.55" / 84 mm x 53 mm x 14 mm
Grosor total
2.10" / 53 mm
Tratamiento de superficies
Clara
Estado latente
21 ms at 9600 baud, 7 ms at 19,200 baud
Output Formats
Binary or ASCII
Entrada de alimentación
5 VDC / ± 10%
Tasa de baudios
19,200 baud
Temperatura de operación
0°C to 70°C
Entorno operativo
Power requirements: 5 VDC (± 10%):
Standby: 0.055 amp
Touchdown (avg.): 0.160 amp
Touchdown (peak): 0.240 ampTemperatura de almacenamiento
-25°C to 85°C
Humedad
95% RH, noncondensing
MTBF - Tiempo medido entre fallos (medida de confiabilidad de un dispositivo o sistema)
50.000 horas demostradas
Opciones de montaje
Mounting hole located 0.150 (3.81 mm) horizontally and vertically inside each corner
Compatibility Mode
E261-280, E271-140, E281A-4002
Cables de control
Contact Elo for more information.
Optional Software/Hardware Handshaking
XON/XOFF, DSR/DTR, RTS/CTS