Presupuesto

• Técnico

  ---

  Número(s) de Parte(s)

  714259-000

  Tecnología

  SAW (ondas acústicas de superficie de IntelliTouch®)

  Cantidad de toques

  Solo toque

  Métodos de entrada

  Dedo
  Mano con guantes
  Lápiz pasivo

  Dimensiones

  2.36" x 3.51" x 0.61" / 59.94 mm x 89.03 mm x 15.44 mm

  Interface

  USB (Full Speed)
  Plug and play compatible

  Tratamiento de superficies

  Clara

  Resolución

  Approximately 4096x4096, size independent, 255 levels of Z (pressure)

  Conversion Time

  Approximately 10.4 ms per coordinate set.

  Voltaje de entrada

  +4.75 to +5.25 VDC

  Entrada de alimentación

  +5 VDC, nominal (+4.75 to +5.25 VDC)

  Reliability

  MTBF greater than 345,000 hours per MIL-HDBK-217-F2 using the parts stress calculation method for the ground benign environment with an ambient temperature of 25°C

  Construction

  Four-layer surface-mount design with internal ground plane for EMI suppression

  Flammability

  The printed circuit board substrate is rated 94V0. All plastic components, such a headers and connectors, are also rated 94V0.

  Shock and Vibration

  Three axis sine wave, 50Hz to 2kHz, 1G, 2 minutes/Octave with dwell on resonance

  ESD

  Per EN 6100-4-2 1995: Level 4. Contact discharge 8kV, air discharge 15kV.

  Temperatura de operación

  0°C to 65°C

  Entorno operativo

  IntelliTouch SmartSet protocol
  Initial/Stream/ Untouch/ Z-axis Enable Modes

  Temperatura de almacenamiento

  -25°C to 85°C

  Humedad

  Operating: 10% to 90% RH, noncondensing
  Storage: 10% to 90% RH, noncondensing

  Altitud

  10,000 feet

  MTBF - Tiempo medido entre fallos (medida de confiabilidad de un dispositivo o sistema)

  30.000 horas demostradas

  Opciones de montaje

  All mounting holes are plated through-holes for chassis ground connection. Refer to the drawings at the end of this document.

  Connectors and Pin Definitions

  The connector configuration permits the controller to be placed in-line between the touchscreen and a USB hub or host attachment.

  Cables de control

  Contact Elo for more information.