CarrollTouch 4000S Serial Controller (Discontinued March 2006)

Presupuesto

• Técnico

  ---

  Número(s) de Parte(s)

  856310-000

  Tecnología

  carrolltouch

  Cantidad de toques

  Solo toque

  Métodos de entrada

  Dedo
  Mano con guantes
  Lápiz pasivo

  Dimensiones

  2.30" x 3.30" x 0.40" / 58.42 mm x 83.82 mm x 10.16 mm

  Interface

  EIA 232E (Serial RS-232), DCE configuration. 8 Data Bits, 1 Stop Bit, No Parity, Full Duplex
  Hardware handshaking: RTS/CTS
  DSR is pulled HIGH (>+3V) by the 4000S when connected and powered. DTR can be asserted by the host to interrupt the flow of data

  Tratamiento de superficies

  Clara

  Resolución

  4096x4096

  Conversion Time

  Approximately 25 ms per coordinate set

  Tasa de baudios

  9600 (default)

  Construction

  Four-layer surface-mount design with internal ground plane for EMI suppression
  

  Flammability

  The printed circuit board substrate is rated 94V0. All plastic components, such as headers and connectors, are also rated 94V0.

  Shock and Vibration

  Three axis sine wave, 50 Hz to 2kHz, 1 G, 2 minutes/Octave with dwell on resonances

  Corriente - Modo de funcionamiento

  Full Infrared SmartSet protocol

  Temperatura de operación

  -20°C to 70°C

  Temperatura de almacenamiento

  -40°C to 85°C

  Humedad

  Operating: 0% to 95% RH, noncondensing
  Storage: 0% to 95% RH, noncondensing

  Altitud

  10,000 feet

  MTBF - Tiempo medido entre fallos (medida de confiabilidad de un dispositivo o sistema)

  50.000 horas demostradas

  Opciones de montaje

  All mounting holes are plated through for chassis ground connection

  Connectors and Pin Definitions

  The connector configuration permits the controller to be placed in-line between the touchscreen and serial I/O attachments.

  Cables de control

  Contact Elo for more information.